GPM London temporary site electrics on a construction site in Dartford, Kent

    Temporary Site Electrics in Dartford

    NICEIC ApprovedSafe ContractorConstruction LineNICEIC Domestic InstallerCHAS AccreditedBAFE RegisteredGas Safe Registered
    In short

    GPM London provides temporary site electrics across Dartford (DA1, DA2) and North Kent. From logistics and warehouse units near the Dartford Crossing to large residential developments around Ebbsfleet, we install temporary builder’s supplies, generator hook-ups and 110V distribution to BS 7375 and BS 7671. We are NICEIC registered, offer free site surveys, and cover call-outs 24/7. Call 02034 901415.

    Powering Dartford’s Biggest Sites

    Dartford is one of the busiest construction and logistics corridors in the South East. The Dartford Crossing, the M25 and the A2 meet here, Ebbsfleet Garden City and The Bridge development keep adding thousands of homes, and the distribution parks around the crossing run at full tilt. That means a steady flow of sites that need serious, reliable power before the permanent supply is energised.

    GPM London has been installing temporary site electrics across Dartford and North Kent since 2014. We handle everything from a single-plot generator setup to phased, site-wide distribution across a large development, all signed off to the standards your principal contractor and insurer expect.

    110V site distribution and temporary builder's supply on a Dartford construction site

    Dartford Temporary Site Electrics At A Glance

    • Service:Temporary builder’s supplies, generator hook-ups, 110V site distribution, festoon and task lighting, inspection and testing.
    • Area covered:Dartford (DA1, DA2), Greenhithe, Stone, Swanscombe and North Kent, off the M25 and the A2.
    • Standards:BS 7375 and BS 7671, 110V centre-tapped earth supply, 30mA RCD protection.
    • Accreditations:NICEIC, BAFE, CHAS, Constructionline, SafeContractor.
    • Availability:24/7, 365-day call-out. Free, no-obligation site survey and quote.

    What We Install On A Dartford Site

    • Temporary builder’s supply (TBS): we arrange the metered mains connection with the network operator (DNO), scaled to the load a larger Dartford site draws.
    • Generator hook-ups: for early-phase plots and remote parts of a development where the mains is not yet in place.
    • 110V site distribution: transformers, main and sub-distribution boards and outlets, laid out across large sites so every trade has safe power where it works.
    • RCD-protected boards: 30mA RCD protection throughout, with cabling routed clear of plant, vehicles and haul routes.
    • Festoon and task lighting: site lighting for darker months, deep interiors and warehouse shells.
    • Inspection and testing: kept compliant with BS 7375 and BS 7671 as the site grows and changes.

    When the build completes we can remove the temporary supply and install the permanent electrics, so you keep one contractor from first fix to handover. See our temporary site electrics service and wider commercial electrical work.

    Temporary Power By Site Type In Dartford

    Dartford sites vary hugely in scale, so the right setup does too:

    Site typeTypical temporary supply
    Logistics and warehouse unitsHigh-capacity metered builder’s supply with phased distribution
    Large residential developmentsSite-wide distribution across multiple plots and phases
    Commercial and retail fit-outsMetered supply with tidy, planned cable routes
    Remote or early-phase plotsGenerator hook-up until the mains connection lands

    If you are not sure what your site needs, our free survey sizes it properly and gives you a clear quote.

    Sized For The Load Your Site Draws

    A large Dartford site is only as good as the supply behind it. We size the temporary supply to the demand, from a modest single-phase setup for a small unit to heavy three-phase distribution for a warehouse or a multi-plot development. Site tools and lighting run through 110V transformers, typically rated from 3.3kVA up to 10kVA per unit, fed from RCD-protected boards. Where a metered mains supply is used, we agree the right capacity with the network operator, commonly a 100A or 200A supply depending on the load, so nothing runs at its limit. Getting the sizing right from day one avoids nuisance tripping and keeps every trade working.

    A Local Contractor, Not Drop-And-Go Hire

    A national hire firm will drop a generator or a board and leave. We do more. As a NICEIC-registered electrical contractor, we survey the site, design and install the distribution, inspect and test it to BS 7375 and BS 7671, maintain it through the build, and can install and certify the permanent electrics at the end. You get one accountable local team from first connection to handover, not a delivery and a phone number.

    Local Expertise

    Why Dartford Sites Need Reliable Temporary Power

    The scale of construction around Dartford is what sets it apart. Logistics and distribution units around Crossways Business Park and Prologis Park draw heavy loads and cannot afford downtime, so the supply has to be sized correctly from day one. Large residential schemes at Ebbsfleet and The Bridge run in phases, so the distribution has to grow and move as plots come on stream. Town-centre regeneration around Lowfield Street and the Hythe Street area brings commercial fit-outs with their own access and timing constraints.

    Being on the M25 and A2, we reach Dartford quickly for setup, changes and call-outs, which matters when a large site cannot sit idle waiting for power. We plan the supply around the phasing, the loads and the access so the whole site keeps moving.

    Temporary Site Electrics Explained

    Temporary site electrics are the safe, temporary electrical supply and distribution installed on a construction or refurbishment site before the permanent connection is in place. They provide reliable construction power for tools, welfare units and lighting, delivered through a metered builder’s supply or an on-site generator and distributed at 110V reduced low voltage. On a UK site the installation is governed by BS 7375 and the wiring regulations BS 7671.

    What Affects The Cost Of Temporary Site Electrics?

    Every Dartford site is different, so there is no single price. The main things that affect the cost are the size of the site and the load required, the distance to the nearest mains connection, whether a temporary builder’s supply or a generator is used, how long the supply is needed, and the access and cable routing across the site. We give you a clear, itemised quote after a free survey, so there are no surprises once the job starts.

    Customer Reviews

    What Our Customers Say

    “I called Nick and he was at our house within the hour. Unbelievable service and done me a huge favour. Been a customer since we moved into the home about 10 years ago. Thoroughly recommend.”
    — Dan Harris, 5-star Google review

    You can read more of our reviews on our Google Business Profile.

    Common Questions

    Temporary Site Electrics In Dartford: Common Questions

    Get In Touch

    Get Your Dartford Site Powered

    Tell us about the site and we will arrange a free, no-obligation survey and quote. Call 02034 901415 or 07951 717046, email info@gpmlondon.com, or use our contact page. Our 24/7, 365-day call-out means if power goes down on site, help is a phone call away.

    For nearby areas, see our pages on temporary site electrics in Swanley and temporary site electrics in Crockenhill.

    NICEIC ApprovedSafe ContractorConstruction LineNICEIC Domestic InstallerCHAS AccreditedBAFE RegisteredGas Safe Registered